Logo PTI
Polish Information Processing Society
Logo FedCSIS

Annals of Computer Science and Information Systems, Volume 8

Proceedings of the 2016 Federated Conference on Computer Science and Information Systems

Using wireless acceleration sensor for system identification

, ,

DOI: http://dx.doi.org/10.15439/2016F592

Citation: Proceedings of the 2016 Federated Conference on Computer Science and Information Systems, M. Ganzha, L. Maciaszek, M. Paprzycki (eds). ACSIS, Vol. 8, pages 11031106 ()

Full text

Abstract. In practical applications, we often encounter problems controlling weakly damped resonant systems. These are devices which often include inertia masses and flexible connecting elements. These devices are mainly gantry cranes, mechatronic systems, elevators, filling lines for the food industry and many others. One approach to improving the transition process in the control of these weakly damped systems is a method of shaping control signals. This method starts to be used in the control of systems with flexible elements in the 90s of the twentieth century. Over the next twenty years, we meet with successful applications, especially in the control of positioning systems. When we are talking about the theoretical description of input shaping today, we meet mainly with two basic approaches. The first is based on the selection of a proper sequence of pulses in the time domain. The second is based on the design of such discrete shaper, which compensates the effect of the complex poles of a controlled system causing residual vibration. Irrespective of the shaper design method, we must know either the systems oscillations and controlled system damping, or the location of the complex poles causing the vibration.

References

  1. J. Fortgang, V. Patrangenaru, W. Singhose, “ Scheduling of Input Shaping and Transient Vibration Absorbers for High-Rise Elevators“, in Proceedings of the American Control Conference, 2006
  2. N. C. Singer, W. Seering, “Per shaping Command Inputs to reduce Systems Vibration, Journal of Dynamic Systems“, in Measurement and Control, vol. 112, 1990
  3. P.Hubinský, P. Hauptle, “Reducing Oscillation during Positioning of a Servomechanism having Flexibility“, in Journal of Electrical Engineering Vol.63, No.4, 2012, ISSN 1335-3632
  4. M. J. Robertson, W. E. Singhose, “Multi-Level Optimization Techniques for Designing Digital Input Shapers“, in Proceedings of the American Control Conference, Arlington 2001
  5. E. Biediger, J. Lawrence, W. Singhose, “Improving Trajectory Tracking for Systems with Unobservable Modes Using Command Generation“, in Proceedings of the American Control Conference, Portland 2005
  6. L. Y. Pao, C. F. Cutforth, “On Frequency-Domain and Time-Domain input Shaping for Multi-Mode Flexibile Structures“, in ASME vol. 125, 2003
  7. N. Singer, W. Singhose, W. Seering, “Comparison of Filtering Methods for Reducing Residual Vibration“, in European Journal of Control, 1999
  8. K. Kozak, J. Huey, W. Sighose, “Performance Measures for Input Shaping“, in Proceedings of the IEEE Conf. on Control Applications, Istanbul, Turkey, 2003
  9. T. D. Tuttle, W. P. Seering, “A Zero-placement Technique for Designing Shaped Inputs to Suppress Multiple-mode Vibration“, in Proceedings of the American Control Conference, Baltimore 1994
  10. J. Miček, J. Juríček, “Discrete shaper of control signals“, in International journal of engineering research in Africa. - ISSN 1663-3571. - Vol. 18 (2015), s. 65-74.
  11. M. Fikar, J. Mikleš, “Identifikácia systémov“, in https://www.kirp.chtf.stuba.sk/fikar/research/ident/ident.pdf - ISBN 80-227-1177-2.